Unit 1:RedBlueAmberWhiteGreenAmber/White SplitBlue/Amber SplitBlue/White SplitGreen/Amber SplitRed/Amber SplitRed/Blue SplitRed/White SplitGreen/White SplitUnit 2:RedBlueAmberWhiteGreenAmber/White SplitBlue/Amber SplitBlue/White SplitGreen/Amber SplitRed/Amber SplitRed/Blue SplitRed/White SplitGreen/White Split
When you purchase a 2 Multi-Pack for $42.96, that means that each “4” is only $23.96. That’s good, but if you purchase the 10 Multi-Pack, you’ll be getting each “4” for just $18. 50...now that’s a great savings. Each light unit has 4 Generation III 1-Watt LEDs that are made to last 100,000 hours which come in your choice of 5 solid colors or 3 split-color combinations. The tough, polycarbonate housing has an aluminum heat-resistant backing. The HALO JR 4, like the rest of the HALO JR Series, also has polycarbonate TIR lenses that stay bright and clear and don’t fog up. It has 22 flash patterns that ‘burst,’ ‘split,’ ‘alternate,’ ‘cycle flash’ and more. The California “Steady” meets that state’s requirements...and the HALO JR 4 has pattern memory, too! TIR lenses produce strong, steady focused beams that can be well seen by those approaching, keeping you safe while performing your duties. The remarkable Halo JR Series can be installed internally or externally on your vehicle, wherever there is a flat surface. Mount the HALO JR 4 on the dash or deck of your vehicle, or because they are sealed with high-tech epoxy and are 100% waterproof, mount them on any exterior flat surface (grille, bumpers, roof, or body) of your patrol car, SUV, or on whatever you drive. Mount flanges, gaskets, and hardware are included, and Halo 4’s are prewired making them easy to hardwire into an existing emergency light set up, or they can be wired separately to a switch.
Never worry about mounting the HALO JR 4 low or high on the exterior of your professional or volunteer unit because the lenses and housings are made of polycarbonate which can take a whole lot of rough use off road and on. Check out the extensive videos that our customers have sent in to us if you wonder how the HALO JR Series would look on your vehicle. Most often surface mounts are bought in pairs so they can be put opposite each other. If you plan to mount them yourself, be sure to read the Installation Guide in the Knowledge Base section of our website before you start!
Video Coming Soon!
Halo JR 4 TIR LED Grille and Surface Mount 4 Multi-Pack
Halo JR 4 TIR LED Grille and Surface Mount 10 Multi-Pack
Halo JR 6 TIR LED Grille and Surface Mount 2 Multi-Pack
Halo JR 6 TIR LED Grille and Surface Mount 4 Multi-Pack