888-893-3308 10am - 4pm EST Mon - Fri
Pilot 4 TIR LED Grille and Surface Mount 2 Multi- Pack

Pilot 4 TIR LED Grille and Surface Mount 2 Multi- Pack

Model: [ pil4-2pck ]
$42.96   $139.92
$42.96   $139.92

Available Options:

Unit 1:

Unit 2:

About The Pilot 4 TIR LED Grille and Surface Mount 2 Multi- Pack

Deck out your POV with 300 Lumens (24 Watts) of high-intensity light when you buy this 2 Multi-Pack. You’ll be getting 2 lightheads, each with 4 Generation IV 3-Watt LEDs to mount strategically around your vehicle. They are so low profile that no one will notice them until you ‘hit the switch’ and blast them with light! You choose the color for both lights from 5 solid color or 7 split-color combinations. Imagine the light show when the 19 flash patterns start to cycle! The LEDs are housed in aluminum casings; rubber gaskets and flanges are included. The highly focused TIR lens are as clear as glass, but won’t shatter or crack because they are made of indestructible polycarbonate material. They stay bright and don’t fog up.  Hardwire the Pilot 4’s to a system already in place; they can be synchronized with up to 19 units and can be set to alternate as well.  The Pilot 4 fits just about anywhere! You only need a spot 1” wide and 6” long; they are perfect for grilles, license plates, racks, and side view mirrors.  They are virtually invisible and blend in well with the factory lights on your vehicle. The Pilot Series meets the strict IP-67 Standard for particles and moisture, so dust or dirt will never penetrate the Pilot 4; it also exceeds SAE guidelines and California Title 13 requirements.


  • (4) Generation IV 3-Watt LEDs/Unit
  • 19 Flash Patterns with Pattern Memory
  • Blends Well with Factory Lights
  • Exceedingly Bright!
  • IP-67 Rating
  • Meets or Exceeds SAE J845 & J595 Standards
  • Meets or Exceeds California Title 13 Requirements
  • 5-Year Limited Warranty on LED Bulbs
  • 2-Year Limited Warranty on Components

Included in Box:

  • 2 Pilot 4 TIR LED Grille and Surface LED Light (prewired)
  • 2 Surface Mount Flanges
  • 2 Rubber Gaskets
  • 4 Screws


5.5"L x 1"W x 1"H

Installing lights can be a little tricky, so if you decide to do it yourself and happen to run into a ‘snag,’ don’t hesitate to contact us.  ETD suggests that you read through the Installation Guide found in our Knowledge Base, lineup the accessories you’ll need (you can also get those from us), and decide where you want to place the lightheads. We’ll be happy to help you in any way we can. ETD has experts in our customer service department who are masters of all light installation procedures. Don’t worry...ETD is here to help you get it right!

Product Demo

Video Coming Soon!

Mounting Options

  • Surface Mount Front Locations
  • Surface Mount Rear Locations
  • Surface Mount Light Side Locations