Items: (0) View Cart
Unit 1:RedBlueAmberWhiteGreenAmber/White SplitBlue/Amber SplitBlue/White SplitGreen/Amber SplitRed/Amber SplitRed/Blue SplitRed/White SplitGreen/White SplitUnit 2:RedBlueAmberWhiteGreenAmber/White SplitBlue/Amber SplitBlue/White SplitGreen/Amber SplitRed/Amber SplitRed/Blue SplitRed/White SplitGreen/White Split
When you buy our new 2 Multi-Pack, you’ll be getting 36 Watts of surface light added to your patrol car or volunteer POV. Mount them on the grille, push bumpers, or surface (as shown to the right) with the included flanges and rubber gaskets. The E-36 comes with its own set of color-coded wires making installation quick and easy, but if you have any doubts about mounting them, check out the Installation Guide in our Knowledge Base. The durable aluminum housing and polycarbonate lens won’t shatter or crack when the going gets tough. They are impact resistant and waterproof because they are sealed with high-tech epoxy and carry the I-67 Rating. Hardwire them to an existing siren or light system. Each light has 36 Generation I (0.05 Watt) LEDs that are made to last 100,000 hours. They have 19 pre-programmed flash (strobe) patterns and pattern memory. Choose from 5 solid color or 7 split-color combinations.
5.7"L x 1.8"D x 1.0"H
Both professionals and volunteers alike use the E-36 Grille and Surface Mount Lights on their first-responder vehicles because they are bright, durable, and easy to install. Check out the videos that our many satisfied customers have sent to us; they are proud to show-off the lights that they’ve bought from ETD! Our Customer Service Department will always help you decide where to mount our emergency lights, and we’ll answer any questions about installation, too. Don’t hesitate to contact us. ETD is here for YOU, Our Valued Customers.
Video Coming Soon!