888-893-3308 10am - 4pm EST Mon - Fri
Stealth 6 Linear LED Visor Light with 2 Pairs of Undercover 8 TIR

$465.88 $284.96

Average rating based on 0 review(s)

The 60 Watt Stealth 6 Visor Light is designed with two sections, one fits over the driver’s side, the other on the passenger side where the visors would normally be installed. Universal visor mounting brackets hold the Stealth 6 in place. Each visor light has linear lenses that spread the beams over 120° illuminating the area in front of the vehicle. The Stealth 6 has built in flashback shields to protect the eyes of those inside when the lights are flashing through their 26 patterns. The control panel has an ON/OFF button, and 3 traffic signal buttons; it also displays the flash mode in use. This interior light has 2 additional options: a takedown light for $20, and alternating lights for $50. You choose the colored lights that best serve you on the job from 13 solid and/or split-color combinations. The power source is a cigarette lighter receptacle; the power plug-in has ON/OFF switches and flash pattern switches on the head and comes with a 9’ cord.

Two pairs of Undercover 8 TIR surface mount lights are included in the bundle which will cover a large area, near and far, when combined with the wide light spread of the Stealth 6. Both housings and lenses are made of tough polycarbonate making them virtually indestructible. Undercovers are hardwired to an existing light system, have 19 strobe patterns with pattern memory, and are intensely bright for their 5” size. Mount them high or low, in the front for back of your police cruiser or POV because they are sealed with industrial grade epoxy and waterproof. Each light head has 4 Generation IV 3 Watt Leds, so these produce 24 Watts of eye-squinting light!

Features of Stealth 6 Visor Light

  • (60) 1-Watt Generation III LEDs
  • 26 Flash Patterns and Pattern Memory
  • A Favorite of DEA, FBI, and Undercover Agents
  • 5-Year Limited Warranty on LED Bulbs
  • 2-Year Limited Warranty on Components
  • Meets or Exceeds SAE J845 & J595 Standards
  • Meets or Exceeds California Title 13 Requirements

Included in Box:

  • (2) LED Stealth 6 Visor Light Bars (Driver/Passenger)
  • 2 Sets of Visor Mount Brackets
  • Power Plug with ON/OFF Switch
  • 9’ Power Cord
  • Flashback Shield

Features of Undercover 8 TIR Surface Mounts

  • (4) Generation IV 3-Watt LEDs / Per Head
  • 19 Strobe Patterns with Pattern Memory
  • Extremely Bright
  • Highly Visible
  • 5-Year Limited Warranty on LED Bulbs
  • 2-Year Limited Warranty on Components
  • Meets or Exceeds SAE J845 & J595 Standards
  • Meets or Exceeds California Title 13 Requirements

Included in Box:

  • 1 Pair of Undercover 8 Grille and Surface LED Lights
  • Surface Mount Flange
  • Rubber Gasket
  • Mounting Screws

Installing the Stealth 6 is easy, but you might need some help with the hardwiring of the Undercovers. It that is the case, then be sure to check out the Installation Guide in our Knowledge Base. And….if you run into a snag, don’t hesitate to contact our Customer Service Department; we’ll ‘walk’ you through the installation.


Dimensions:

Stealth 6: 17" L x 6.5" D x 1.5" H per side
LED Stealth 6 Advisor Dimensions

Undercover 8: 5"L x 1.5"W x 1.75"H

*This offer cannot be combined with other free promotional items or sales.

Product Demo

Mounting Options

  • Surface Mount Front Locations
  • Surface Mount Rear Locations