888-893-3308 10am - 4pm EST Mon - Fri
Voyager 15 Flood Light Off Road LED Light BarVoyager 15 Flood Light Off Road LED Light BarVoyager 15 Flood Light Off Road LED Light BarVoyager 15 Flood Light Off Road LED Light BarVoyager 15 Flood Light Off Road LED Light Bar
$272.96 $164.96
Average rating based on 0 review(s)

About The Voyager 15 Flood Light Off Road LED Light Bar

The Voyager 15 is a powerhouse of light. Turn night into day at emergency scenes or work sites, or light up the entire area in front of you as you ride down the darkest trails. 15 CREE LEDs are positioned in groups of 3 on a 21.5” light bar; each LED has 10 Watts.  That’s a whopping 150 Watts of light that equals 13,500 lumens! The highly engineered polycarbonate flood light lens is designed to disperse the LED light over a 120° spread.  It is housed in a die-cast aluminum casing that has an IP-67 rating; that means no dirt or dust will seep into the light, and it’s watertight up to a depth of 1 meter (39.37”.) The ‘15’ comes prewired with an 18’ cord and runs on 10-30 Volts. Sliding, adjustable brackets allow you to position the light bar exactly where you want it. Do you want maximum flood light capability?  If that’s what you’re looking for, Voyager 15 is the top of the line in the series.

Features:

  • (15) 10-Watt CREE LEDs
  • Steady Burn 150 Watt Bright Flood light (13,500 Lumens)
  • Wide-Angle 120° Light Spread OFF-ROAD & ON
  • Turn Night into Day at Emergency Scenes and Construction Sites
  • Perfect Size for Large Trucks, SUVs, OFF Road Vehicles
  • IP-67 Rating
  • Meets or Exceeds SAE J845 & J595 Standards
  • Meets or Exceeds California Title 13 Requirements
  • 5-Year Limited Warranty on LED Bulbs
  • 2-Year Limited Warranty on Components

Included in Box:

  • Voyager 15 OFF ROAD FLOODLIGHT
  • Aluminum Mounting Bracket
  • 18’ Pre-wired Cord

Dimensions:

21.5"L x 3"W x 2.5”D

ETD always recommends that you have an Emergency Vehicle Technician install the lights you buy from us, but if you want to do it yourself with a buddy, then go to the Installation Guide in the ETD Knowledge Base. There you’ll find all the information you’ll need to get the job done. Once you’re finished, send ETD a photo or video of how the lights look on your vehicle. We’ll add them to our Customer Video section for all to see!