888-893-3308 10am - 4pm EST Mon - Fri
IW3 IMPACT Series 100 Watt SirenIW3 IMPACT Series 100 Watt SirenIW3 IMPACT Series 100 Watt SirenIW3 IMPACT Series 100 Watt SirenIW3 IMPACT Series 100 Watt Siren

$399.96 $299.96

Average rating based on 0 review(s)

The IW3 Siren is a 100 watt siren that features a 27 button switch box for total control of your emergency vehicle light and siren setup. These buttons are:

  • 3 Main buttons for Codes 1, 2, and 3.
  • 8 buttons for different siren tones
  • 8 buttons with varying amperage output for lights
  • 8 button switches (trigger switches) such as, directional, flash pattern change, etc.

The Code buttons are memory switches for your lighting setup. A different flash pattern can be programmed to each switch for easy light control in any situation.
This siren unit only requires 12 volts of power and features a total of 8 different siren sounds, including wail, yelp, phaser, and air horn bursts.
The IW3 Siren can easily be connected to any 12v emergency vehicle lights in our inventory, or from other manufacturers. A total of 9 fuses are available for wiring your lights into. The ports available are:

  • 2 10amp fuses
  • 4 5amp fuses
  • 3 15amp fuses
  • All wiring and cables are included

A full complement of wiring and cables, a PA microphone, and stickers for labeling your buttons come standard. A speaker is not included and must be purchased separately.

Demo Siren Sounds
  • Less than 0.1amp draw on Standby
  • Operating Temperature : -4°F to 140°F.
  • Frequency Range: 300-1600Hz.
  • Siren Sounds: 8
  • Maximum Voltage Out: 12V
  • 27 Button Control Head
  • Two 15amp Outputs for Lights
  • Two 10amp Outputs for Lights
  • Four 5amp Outputs for Lights
  • Works with almost all Emergency Light systems
  • Operating Current: 10 amps nominal with no light heads.
  • Harmonic Distortion: Less than 10% between 5 and 100 watts.
8.7 "Long x 5.2" Wide x 2.0"High
IW3 Siren Dimensions