Navigator ‘bar’ spot lights come in several LED sizes: 12, 24, 40, 60, 80, and 100. Each size gets longer and longer, but never any wider than 3.75”. The double-decker design of the die-cast aluminum housing is practical, efficient, and low profile. 60 Generation IV 3-Watt LEDS are stacked 30 on 30; that’s 180 Watts of focused light at ground level or way into the distance depending on where you angle it with the adjustable aluminum brackets. Spot light optics are provided by a moulded polycarbonate lens, a material that’s clear as glass, yet shatterproof. Only CREE LEDs that last 30,000 hours are used in the Navigator Series; the ‘60’ produces 10,800 lumens, light so bright it’s called daylight white and reads 6500K on the light spectrum. You could say it’s SUPER WHITE because standard white light measures 5000K. This light runs on 10-30 volts and comes pre-wired with an 18’ power cord. Check around, you’ll find light bars this length, but unless they have CREE LEDs, it will be hard to find one THIS BRIGHT.
If you want to do the installation yourself, ETD has everything you’ll need to do the job right. You’ll find the Installation Guide in Knowledge Base, switches, extra cable, zips ties, and split looms to keep the wiring tidy right here on the website. And... if you run into a ‘SNAG’....JUST CONTACT US... on CHAT or on your favorite social media. We have a competent customer service team that will happily ‘walk you through’ the installation process.