Lynx L6-6 Linear Interior / Exterior LED Light Bar

The Lynx L6-6 combines six warning heads with a broad 120-degree Linear beam in a 27-inch housing. Its 36 Generation V 3-watt LEDs deliver SAE J595 Class 1 warning performance for rear-window, rear-deck and suitable exterior installations. With 36 selectable patterns and Dual Memory, you can save two preferred settings and keep them after power is disconnected. Choose from 21 fixed-color arrangements and add circuit-board waterproofing for exterior use.

• 36 Generation V 3-watt LEDs, with six LEDs in each of six heads.
• Meets or exceeds SAE J595 Class 1 warning-light performance requirements.
• 36 selectable patterns.
• Dual Memory saves two favorite patterns independently.
• Both saved patterns remain after a complete power disconnect.
• Wig-wag, strobe and steady-on functions.
• Linear lenses provide a wide 120-degree beam.
• 27 × 2 × 1.5-inch bare housing; weighs 3.4 lb.
• 21 fixed-color options: five solid, eight split and eight alternating.
• 12V DC operation, with a 12-18V operating range.
• 1 A flashing draw and 5 A steady-on draw at 12V.
• Built-in flasher; no separate flasher module needed.
• Synchronizes with current Lynx T6 and L6 lights.
• Two L brackets and four bracket screws included.
• 10-foot, 14 AWG power cable included.
• Optional cigarette-lighter plug includes a Dual Memory switch, pattern button and fuse.
• Optional suction cups and flashback guard for mounting behind glass.
• Optional circuit-board waterproofing required for exterior use.
• Free 5-year warranty included as standard.

The L6-6 adds two heads and 9 inches of housing length over the L6-4, creating a longer row of warning lights while keeping the same 120-degree Linear beam angle. It is an option when you want six heads across one mounting position without needing room for the 35 5/8-inch L6-8. The Linear lenses spread light across a broad angle; increasing the number of heads does not change that stated angle.

For a rear-window installation, inspect the view through the entire 27-inch mounting area. Headrests or a center brake light may obstruct the middle heads, while pillars and trim can hide the outer ones from angled approaches. Check all six heads from outside before securing the bar. Tint and glass angle affect visible output, so assess the position in daylight and darkness and use the optional flashback guard to help reduce cabin reflections.

An anodized aluminum housing and scratch- and shatter-resistant polycarbonate lenses protect the assembly. Individual LED modules are replaceable, with spare parts available from ETD. A damaged head can be serviced without automatically replacing the entire light bar.

The L6-6 offers five solid, eight split and eight alternating color arrangements. Solid uses one color across all six heads. Split groups three heads of one color beside three of the other. Alternating places the colors in turn across the bar. Each head has six LEDs and keeps its assigned color.

A red/blue split is Red/Red/Red/Blue/Blue/Blue; the alternating version is Red/Blue/Red/Blue/Red/Blue. Both give you three heads of each color. Choose the placement you need independently of the flash pattern, since the LEDs do not change colors. Confirm orientation with ETD if one color must be on a particular side, and choose colors authorized for your vehicle and role.

The L6-6 suits first responders, fleet managers and POV owners with space for a longer warning bar on patrol, fire and rescue, tow, utility, construction or security vehicles. Its six-head layout can work across a rear deck or window, or at a suitable exterior mounting point. Measure the proposed location rather than assuming fit from the vehicle type.

Left, right and center-out are available as selectable directional patterns, without separate arrow controls. For warning from additional approaches, combine the bar with appropriately positioned lights. Current Lynx L6 and T6 units can synchronize through their dedicated sync wires. Exterior use requires the optional circuit-board waterproofing upgrade.

Compare lengths and lens options in our Lynx LED bars for interior and exterior mounting.

The Lynx L6-6 meets or exceeds SAE J595 Class 1, California Title 13, ECE R65, CISPR 25 Class 3, SAE J1455 and RoHS requirements. These cover warning-light performance, electromagnetic emissions, vehicle environmental performance and restricted substances, as applicable. CISPR 25 Class 3 addresses electromagnetic emissions; it is not a promise of zero interference with every radio installation.

The optional cigarette-lighter control plug includes the Dual Memory switch, pattern-change button and a fuse. An inline switch, suction cups, flashback guard, headliner brackets for visor mounting and an additional 10 feet of wire are available separately. The extra wire extends the supplied cable; it does not replace it. Suction cups and the flashback guard can be used together.

Circuit-board waterproofing is an optional upgrade for exterior mounting. The light heads and housing already have IP67 protection; the upgrade adds IP67 protection to the circuit board. Waterproofing does not restrict your color or mounting choice. For hardwiring, purchase the required 10 A fuse and suitable fuse holder separately.

The bare housing measures 27 × 2 × 1.5 inches and weighs 3.4 lb. Allow extra room for brackets, accessories and cable routing. Measure at the intended mounting height, where window trim or equipment may narrow the usable space, and check that the mounting surface can support the complete assembly.

Use the supplied L brackets for a suitable rear-deck installation, or select optional suction cups for mounting against suitable glass. Suction cups and the optional flashback guard can be used together. Keep all six heads visible and leave the vehicle's brake lights and the driver's view unobstructed. A wide window alone does not guarantee a clear 27-inch mounting position.

The supplied L brackets also suit an appropriate push-bumper or other exterior mounting position. Select circuit-board waterproofing for exterior use, including a suitable headache-rack installation. Check that nearby vehicle parts do not block the heads, and protect electrical connections. Use vehicle attachment hardware suited to the mounting surface; the four supplied screws attach the brackets to the light.

Optional headliner brackets allow visor or headliner mounting where there is room for the full 27-inch housing and its hardware. A dash or cage position may also be suitable if the complete assembly fits securely. Keep the light and wiring clear of airbags, controls and the driver's sightline. Plan the cable route before mounting; an optional extra 10 feet of wire extends the included 10-foot cable.

Hardwire the L6-6 to a fused 12V DC supply, or choose the optional cigarette-lighter plug for plug-in operation. Use a 10 A fuse for one L6-6. The optional plug includes a fuse; hardwired installations require separately purchased fuse protection. An inline switch is also available separately.

The optional control plug lets you power either saved memory setting and change patterns with its pattern-change button. Both saved selections remain after unplugging. To coordinate multiple lights, use the dedicated sync connection with current Lynx T6 or L6 models; older T4 units are not compatible.

Use the L6-6 installation instructions or Download the L6-6 installation PDF for wiring and operating steps.

Have a qualified installer handle vehicle-specific wiring and mounting. For product-operation questions, email customerservice@extremetacticaldynamics.com with your model and order number.

Choose the L6-6 when a 27-inch housing fits your mounting area and six heads suit the installation. The L6-8 has eight heads in a 35 5/8-inch housing. Both use 120-degree Linear lenses and offer left, right and center-out patterns. Check the usable mounting space before choosing the longer model.

The light heads and housing have IP67 protection as standard. For exterior use, select the optional circuit-board waterproofing upgrade. This applies to push-bumper, headache-rack and other exterior installations.

Left, right and center-out are selectable patterns on the L6-6. They use pattern selection rather than separate arrow controls. Follow the L6-6 installation guide for the control connections and pattern-selection steps.

Split colors use A/A/A/B/B/B, grouping three heads of each color together. Alternating colors use A/B/A/B/A/B. For red/blue, that means three red heads beside three blue heads, or red and blue repeated in turn. Each head stays its assigned color.

Yes. The optional cigarette-lighter plug has a Dual Memory switch that lets you power either saved setting, plus a pattern-change button. It also includes a fuse.

Yes. Current Lynx L6 and T6 lights can synchronize through the dedicated sync wire, so the different lens types do not prevent synchronization. Older T4-series lights are not compatible.

At 12V, the L6-6 draws 1 A while flashing and 5 A on steady-on. Use these current figures when planning the electrical load. Any light can discharge a battery when left running with the engine off; runtime depends on the battery and other equipment using power.

No. The flasher is built into the light. Hardwiring requires a fused power connection and suitable controls; the optional inline switch and cigarette-lighter control plug are sold separately.

No. The 27 × 2 × 1.5-inch measurements describe the bare housing. Leave additional space for brackets, accessories and cable routing. The light weighs 3.4 lb.

Yes. The L6-6's individual LED modules are replaceable, and spare parts are available from ETD. Contact us with your model and the part you need.

The Lynx L6-6 comes standard with a free 5-year warranty. No upgrade selection is required. For warranty assistance, contact ETD with your order number and a description of the problem before returning the light.

Orders of $88 or more qualify for free standard shipping to the contiguous United States and APO/FPO addresses. Shipping charges for smaller orders are shown below. ETD uses USPS and UPS; contact us about international shipping or special shipping arrangements.

Email ETD for return authorization, an RMA number and the return form. Eligible returns must be postmarked within 30 days of delivery and remain brand-new with all parts and packaging. Installation attempts or opened internal packaging can make an item ineligible, so review the return terms before installing.

You pay return shipping, and ETD's original shipping cost is deducted from refunds, including subsidized shipping. Custom-built items are not returnable; choosing the waterproofing upgrade alone does not make this light custom-built. Refunds and exchanges are generally processed within 1-10 business days after receipt.