Description & Features
Overview
The Lynx L6-8 is the longest bar in the L6 lineup, with eight warning heads and 48 Generation V 3-watt LEDs in a 35 5/8-inch housing. Its 120-degree Linear lenses provide a broad optical spread, with SAE J595 Class 1 warning performance. Choose from 36 selectable patterns and save two favorites with Dual Memory. With 21 fixed-color arrangements, the L6-8 gives you a full eight-head layout for a suitable rear window, rear deck or exterior position. Exterior use requires the optional circuit-board waterproofing upgrade.
- 48 Generation V 3-watt LEDs, with six LEDs in each of eight heads.
- Meets or exceeds SAE J595 Class 1 warning-light performance requirements.
- 36 selectable patterns.
- Dual Memory saves two favorite patterns independently.
- Both saved patterns remain after a complete power disconnect.
- Wig-wag, strobe and steady-on functions.
- Linear lenses provide a wide 120-degree beam.
- 35 5/8 × 2 × 1.5-inch bare housing; weighs 4 lb.
- 21 fixed-color options: five solid, eight split and eight alternating.
- 12V DC operation, with a 12-18V operating range.
- 1.25 A flashing draw and 6 A steady-on draw at 12V.
- Built-in flasher; no separate flasher module needed.
- Synchronizes with current Lynx T6 and L6 lights.
- Two L brackets and four bracket screws included.
- 10-foot, 14 AWG power cable included.
- Optional cigarette-lighter plug includes a Dual Memory switch, pattern button and fuse.
- Optional suction cups and flashback guard for mounting behind glass.
- Optional circuit-board waterproofing required for exterior use.
- Free 5-year warranty included as standard.
Light Output & Visibility
The L6-8 brings the most heads and longest housing in this Linear lineup to one mounting position. Compared with the L6-6, it adds two heads, 12 LEDs and 8 5/8 inches of length. Both use 120-degree Linear lenses. Choose the eight-head version when you want the longer row of lights and have clear mounting space for the entire assembly.
A wide rear window can still hide the outer heads behind pillars or trim, especially when viewed at an angle. Check the middle heads around headrests, a center brake light and equipment as well. The Linear beam spreads broadly, but it cannot pass through an obstruction. Inspect the proposed position from outside in daylight and darkness, accounting for tint and glass angle. Use the optional flashback guard to help reduce cabin reflections, and avoid looking directly into the operating LEDs at close range.
An anodized aluminum housing and scratch- and shatter-resistant polycarbonate lenses protect the assembly. Individual LED modules are replaceable, with spare parts available from ETD. A damaged head can be serviced without automatically replacing the entire light bar.
Color Options
Choose from 21 fixed-color arrangements: five solid, eight split and eight alternating. A solid L6-8 uses one color across all eight heads. A split version puts four heads of each color together; an alternating version repeats the two colors across the bar. Every head contains six LEDs of its assigned color.
| Arrangement | Available colors | Eight-head arrangement |
|---|---|---|
| Solid (5) | White, Red, Blue, Amber, Green | A/A/A/A/A/A/A/A |
| Split (8) | Red/White, Blue/White, Red/Blue, Amber/White, Green/Amber, Red/Amber, Blue/Amber, Green/White | A/A/A/A/B/B/B/B |
| Alternating (8) | Same eight color pairs listed above | A/B/A/B/A/B/A/B |
For red/blue, split groups four red heads beside four blue heads. Alternating places red and blue heads in turn across all eight positions. Both layouts contain four heads of each color. Color placement is fixed and does not change when you select another flash pattern. Confirm orientation with ETD if a specific color must be on one side, and select colors authorized for your vehicle and role.
Recommended Uses & Limitations
The L6-8 suits first responders, fleet managers and POV owners who have space for a long warning bar on a patrol, fire and rescue, tow, utility, construction or security vehicle. It can be mounted across a suitable rear deck or window, or on an appropriate exterior mounting surface with circuit-board waterproofing. Its length makes measuring the actual installation area especially important.
Left, right and center-out are available as selectable directional patterns, without separate arrow controls. Keep all eight heads unobstructed so the chosen sequence remains visible. Additional lights are needed for approaches the bar does not face; current Lynx L6 and T6 units can synchronize through dedicated sync wires.
Compare compact and longer models in our interior and exterior Lynx LED light bar collection.
Technical Specifications
Lighting
| Specification | Lynx L6-8 |
|---|---|
| Heads / LED count | 8 heads / 48 LEDs; 6 LEDs per head |
| LED generation / rating | Generation V / 3 W per LED |
| Combined LED rating | 144 W (48 × 3 W) |
| Optics / beam angle | Linear / 120 degrees |
| Color arrangements | 21 total: 5 solid, 8 split, 8 alternating |
| Published LED life | 100,000 hours; LED specification, not a total product-life guarantee |
Power
| Specification | Lynx L6-8 |
|---|---|
| Nominal voltage / operating range | 12V DC / 12-18V DC |
| Flashing current at 12V | 1.25 A |
| Steady-on current at 12V | 6 A |
| Fuse for one unit | 10 A |
| Included power cable | 10 feet / 14 AWG |
| Standard connection | Hardwire |
| Optional controls | Inline switch; cigarette-lighter plug with Dual Memory switch and pattern-change button |
| Fuse inclusion | Included with optional cigarette-lighter plug; otherwise purchased separately |
| Flasher | Built in |
| Electrical protection | Reverse-polarity and overvoltage protection |
Physical & Compliance
| Specification | Lynx L6-8 |
|---|---|
| Bare housing (length × depth × height) | 35 5/8 × 2 × 1.5 inches; excludes brackets and cable |
| Product weight | 4 lb |
| Housing / lens material | Anodized aluminum / polycarbonate |
| Light-head and housing protection | IP67 |
| Circuit-board protection | Optional waterproofing upgrade brings circuit-board protection to IP67; select for exterior mounting |
| Operating temperature | -30°C to +65°C / -22°F to +149°F |
| Serviceability | Replaceable LED modules; spare parts available |
| Warranty | Free 5-year warranty included as standard |
The Lynx L6-8 meets or exceeds SAE J595 Class 1, California Title 13, ECE R65, CISPR 25 Class 3, SAE J1455 and RoHS requirements. These cover warning-light performance, electromagnetic emissions, vehicle environmental performance and restricted substances, as applicable. CISPR 25 Class 3 addresses electromagnetic emissions; it is not a promise of zero interference with every radio installation.
Patterns & Functions
| Function | Operation |
|---|---|
| Selectable patterns | 36 |
| Warning functions | Wig-wag, strobe and steady-on |
| Directional patterns | Left, right and center-out selectable patterns; no separate arrow controls |
| Dual Memory | Two independently saved pattern settings |
| Memory retention | Both settings retained after power disconnect |
| Synchronization | Dedicated sync wire; compatible with current Lynx T6 and L6 series |
| Older-series compatibility | Does not synchronize with T4-series lights |
Included in Box
Included Items
| Item | Quantity |
|---|---|
| Lynx L6-8 light bar | 1 |
| L mounting brackets | 2 |
| Bracket screws | 4 |
| 10-foot, 14 AWG power cable | 1 |
Optional Accessories Sold Separately
The optional cigarette-lighter control plug includes the Dual Memory switch, pattern-change button and a fuse. An inline switch, suction cups, flashback guard, headliner brackets for visor mounting and an additional 10 feet of wire are available separately. The extra wire extends the supplied cable; it does not replace it. Suction cups and the flashback guard can be used together.
Circuit-board waterproofing is an optional upgrade for exterior mounting. The light heads and housing already have IP67 protection; the upgrade adds IP67 protection to the circuit board. Waterproofing does not restrict your color or mounting choice. For hardwiring, purchase the required 10 A fuse and suitable fuse holder separately.
Installation & Wiring Instructions, Fitment, Mounting Locations & Options
Installation and Wiring Instructions
Use the L6-8 installation instructions or Download the L6-8 installation PDF for wiring and operating steps.
Have a qualified installer handle vehicle-specific wiring and mounting. For product-operation questions, email customerservice@extremetacticaldynamics.com with your model and order number.
Rear-Deck and Window Mounting
Measure for the 35 5/8 × 2 × 1.5-inch bare housing plus brackets, accessories and cable routing. The L6-8 weighs 4 lb. Measure at the intended mounting height: a window's widest point may not match the usable space lower down or near its upper trim. Check the mounting surface and the view through the glass across the complete length.
Use the supplied L brackets on a suitable rear deck, or select optional suction cups for mounting against suitable glass. The optional flashback guard can be used with suction cups. Before securing the bar, check both ends and the center from outside, including angled approaches. Keep the vehicle's brake lights and the driver's view clear.
Exterior and Other Mounting Options
For an appropriate push bumper, headache rack or other exterior location, use the included L brackets and select circuit-board waterproofing. Confirm there is room for the full bar and that nearby vehicle parts do not block any of the eight heads. Protect electrical connections and choose vehicle attachment hardware for the mounting surface. The four supplied screws attach the brackets to the light.
Optional headliner brackets support visor or headliner mounting where the full 35 5/8-inch housing and its hardware fit securely. A dash or cage installation also depends on the available space and attachment points. Keep the bar and wiring clear of airbags, controls and the driver's sightline. Plan the cable route before fitting the light; an optional extra 10 feet of wire extends the supplied cable.
Power and Controls
Hardwire the L6-8 to a fused 12V DC supply, or choose the optional cigarette-lighter plug for plug-in operation. Use a 10 A fuse for one L6-8. The optional plug includes a fuse; hardwired installations require separately purchased fuse protection. An inline switch is also available separately.
The optional control plug lets you power either saved memory setting and change patterns with its pattern-change button. Both saved selections remain after unplugging. To coordinate multiple lights, use the dedicated sync connection with current Lynx T6 or L6 models; older T4 units are not compatible.
Compare Models
The L6-8 is the eight-head, 35 5/8-inch model in the Linear lineup. All sizes use 120-degree Linear lenses; compare the number of heads and the space each housing needs.
| Model | Heads / LEDs | Length | Key function / difference | Best fit |
|---|---|---|---|---|
| Lynx L6-1 | 1 / 6 | 4.75 in | Single-head compact warning light | Very tight mounting positions |
| Lynx L6-2 | 2 / 12 | 9.5 in | Compact two-head warning light | Dash, deck and paired installations |
| Lynx L6-4 | 4 / 24 | 18 in | Four-head warning; left/right patterns | Rear decks and push bumpers with room for an 18-inch bar |
| Lynx L6-6 | 6 / 36 | 27 in | Wider housing; left/right/center-out patterns | Wider rear-window applications |
| Lynx L6-8 | 8 / 48 | 35 5/8 in | Longest housing in this lineup; left/right/center-out patterns | Broad rear-window coverage where the bar fits |
Choose the L6-8 when the full 35 5/8-inch assembly fits and you want all eight heads in one housing. The 27-inch L6-6 saves 8 5/8 inches of mounting length while retaining left, right and center-out patterns. The 18-inch L6-4 is another option where a shorter four-head bar suits the available space. A longer housing is useful only when its heads remain visible.
The matching T6-8 has the same dimensions, LED count, current draw, colors, functions and accessories. Its 40-degree TIR lenses provide a focused beam in place of the L6-8's 120-degree Linear lenses. Choose the lens for the viewing angles your installation needs. The other matched pairs are L6-1/T6-1, L6-2/T6-2, L6-4/T6-4 and L6-6/T6-6.
Frequently Asked Questions
What do I gain with the L6-8 instead of the L6-6?
The L6-8 adds two heads and 12 LEDs, bringing the total to eight heads and 48 LEDs. Its housing is 35 5/8 inches long versus 27 inches for the L6-6. Both have 120-degree Linear lenses and left, right and center-out patterns. Choose the longer model when you have room for all eight heads to remain visible.
Is the standard L6-8 waterproof?
The light heads and housing have IP67 protection as standard. For exterior use, select the optional circuit-board waterproofing upgrade. This applies to push-bumper, headache-rack and other exterior installations.
How do I select left, right or center-out?
Left, right and center-out are selectable patterns on the L6-8. They use pattern selection rather than separate arrow controls. Follow the L6-8 installation guide for the control connections and pattern-selection steps.
How do split and alternating colors differ?
Split colors use A/A/A/A/B/B/B/B, grouping four heads of each color together. Alternating colors use A/B/A/B/A/B/A/B. A red/blue split has four red heads beside four blue heads; the alternating layout repeats red and blue across the bar. Individual heads do not change color.
Can the optional plug operate both memory settings?
Yes. The optional cigarette-lighter plug has a Dual Memory switch that lets you power either saved setting, plus a pattern-change button. It also includes a fuse.
Can the L6-8 synchronize with TIR lights?
Yes. Current Lynx L6 and T6 lights can synchronize through the dedicated sync wire, so the different lens types do not prevent synchronization. Older T4-series lights are not compatible.
How much power does it draw, and will it drain my battery?
At 12V, the L6-8 draws 1.25 A while flashing and 6 A on steady-on. Use these figures when planning the electrical load. Running it with the engine off can discharge the battery; runtime depends on battery capacity, condition and other equipment using power.
Does it need an external flasher?
No. The flasher is built into the light. Hardwiring requires a fused power connection and suitable controls; the optional inline switch and cigarette-lighter control plug are sold separately.
Are the brackets included in the dimensions?
No. The 35 5/8 × 2 × 1.5-inch measurements describe the bare housing. Allow extra room for brackets, accessories and cable routing. Product weight is 4 lb.
Can I replace one LED module?
Yes. The L6-8's individual LED modules are replaceable, and spare parts are available from ETD. Contact us with your model and the part you need.
Warranty / Shipping and Returns
Warranty
The Lynx L6-8 comes standard with a free 5-year warranty. No upgrade selection is required. For warranty assistance, contact ETD with your order number and a description of the problem before returning the light.
Shipping
Orders of $88 or more qualify for free standard shipping to the contiguous United States and APO/FPO addresses. Shipping charges for smaller orders are shown below. ETD uses USPS and UPS; contact us about international shipping or special shipping arrangements.
| Order total | Contiguous US | APO / FPO |
|---|---|---|
| Up to $49.99 | $5.99 | $5.99 |
| $50-$87.99 | $9.99 | $9.99 |
| $88 or more | Free | Free |
Returns
Email ETD for return authorization, an RMA number and the return form. Eligible returns must be postmarked within 30 days of delivery and remain brand-new with all parts and packaging. Installation attempts or opened internal packaging can make an item ineligible, so review the return terms before installing.
You pay return shipping, and ETD's original shipping cost is deducted from refunds, including subsidized shipping. Custom-built items are not returnable; choosing the waterproofing upgrade alone does not make this light custom-built. Refunds and exchanges are generally processed within 1-10 business days after receipt.