Lynx T6-2 TIR Interior / Exterior LED Light Bar

The 9.5-inch Lynx T6-2 adds two-head warning lighting to dash and rear-deck installations where space is tight. It has twelve Generation V 3-watt LEDs, a combined LED rating of 36 watts, and SAE J595 Class 1 performance. Choose from 36 patterns, including wig-wag, strobe and steady-on. Dual Memory saves two favorites, even when you disconnect the power. Its TIR optics focus light in a 40-degree beam toward approaching traffic. It is part of our interior and exterior LED light bars range.

• Twelve Generation V 3-watt LEDs with a 36-watt combined LED rating.
• Meets or exceeds SAE J595 Class 1.
• 36 selectable patterns.
• Syncable with other Lynx units
• Dual Memory saves two favorite patterns.
• Saved patterns stay in memory after a complete power disconnect.
• Wig-wag, strobe and steady-on functions.
• TIR optics focus light in a 40-degree beam.
• Compact 9.5 × 2 × 1.5-inch housing, excluding brackets.
• Choose from 13 solid or fixed split-color combinations.
• Runs on 12V DC; not for direct connection to 24V.
• Hardwire it or add the optional cigarette-lighter plug with ON/OFF and pattern control.
• Dedicated sync connection for compatible Lynx T lights.
• Includes two L brackets, four bracket screws and a 10-foot power cord.
• Optional suction cups and flashback guard for window installations.
• Optional waterproofing upgrade required for exterior mounting.
• Free 5-year warranty included as standard.

Choose your color, mounting setup and power connection. The T6-2 runs on 12V DC and comes with a built-in flasher, two L brackets, four bracket screws and a 10-foot cord. Hardwire it or add the optional cigarette-lighter plug for ON/OFF and pattern control. There are 13 solid or fixed split-color combinations, with optional suction cups and a flashback guard for window installations. For exterior mounting, select the waterproofing upgrade.

TIR means total internal reflection. It focuses the beam toward approaching traffic. Use the T6-2 for a specific approach, with lights in other positions when you need wider coverage.

For mounting behind glass, aim through a clear area and check the light in daylight and darkness. Window tint, glass angle and obstructions can reduce visible output. SAE J595 Class 1 describes warning-light performance; it does not guarantee visibility through every window or from every angle.

Choose matching colors or one color per head. Colors are fixed; the heads do not switch colors. If left/right placement matters, confirm the orientation with ETD before ordering.

Choose colors permitted for your vehicle, location and authorized use.

Add compact warning lighting to police vehicles and authorized fire or rescue vehicles where a larger light bar will not fit.

Use it on tow, utility, snow-plow and construction vehicles to add warning at a specific mounting point.

Need left/right traffic arrows? Choose a traffic-advisor model. The T6-2 provides warning patterns, not directional arrows.

Customer reviews describe rear-window, rear-deck, and windshield installations. Use these for ideas, then check the space and mounting needs of your own vehicle.

Use the housing measurements below to check your available space. Leave extra room for the brackets and cable.

ETD lists the following performance ratings and operating limits for this model.

The box includes one Lynx T6-2 light, two L mounting brackets, four bracket screws and a 10-foot power cord.

The built-in flasher saves buying and mounting a separate module. The light has an anodized aluminum housing, a polycarbonate lens and replaceable LED modules. If a module needs service, ask ETD about a replacement.

The optional cigarette-lighter control plug includes the Dual Memory power switch with pattern selection. The plug, suction cups, flashback guard and an additional 10 feet of wire are available separately. Waterproofing is an optional upgrade for exterior mounting.

Start with the space you have. Measure the mounting area and cable route, leaving room for brackets and wiring. Keep the light clear of airbags, controls and your view of the road.

Before drilling, test-fit the brackets and check that the cable reaches your power connection.

Use suitable mounting hardware and protect drilled exterior openings. Attach suction cups to clean, dry glass and check their hold.

Aim toward approaching traffic. Check for cabin reflections with an interior mount; the optional flashback guard helps reduce them.

Use the T6-2 installation instructions to identify the power, ground, pattern and sync connections, and the required circuit protection.

Keep cables away from heat, sharp edges and moving parts. Protect exterior connections and test the finished installation before driving.

Use a 12V vehicle supply; do not connect directly to 24V.

Select patterns through your hardwired controls or the optional control plug. Steady-on is one of the pattern choices. Follow the installation instructions to select and save your two memory settings.

Clean the lens and inspect mounts, suction cups and cables regularly. Fix loose or damaged parts before use. Contact ETD before opening the housing.

Use the T6-2 installation instructions or Download the T6-2 installation PDF for wiring and operating steps.

For ordering, accessories or fleet questions, call 888-893-3308, Monday-Friday, 10 a.m.-4 p.m. Eastern. Email product-operation questions to customerservice@extremetacticaldynamics.com with your model and order number, if available. A qualified installer can assess vehicle-specific mounting and wiring.

Contact ETD for help with government purchase orders.

Choose T6-2 for compact two-head warning. Before choosing a longer model, compare its dimensions, mounts and controls with your space and required functions.

Choose TIR optics for a focused beam or Linear optics for a broader spread. To warn traffic from several directions, consider a rooftop light bar or lights placed around the vehicle.

Yes. Runtime depends on battery capacity, condition and other equipment using power. The T6-2 draws more current in steady-on mode than while flashing.

Yes. Use the sync wire to connect compatible Lynx T-series lights, such as two units on opposite sides of a rear deck. Lynx Linear lights cannot sync with this model.

No. The listed size is for the housing only. Allow extra space for the brackets and cable when checking fit.

Yes, with the optional waterproofing upgrade. Select it when ordering, use suitable exterior mounts and protect the electrical connections.

Yes. Dual Memory keeps both saved patterns after power is disconnected, ready for the next use.

The Lynx T6-2 comes standard with a free 5-year warranty. No upgrade selection is required.

For a warranty claim, contact ETD with your order number and a description of the problem before sending the light back. Keep your proof of purchase.

Check availability and the delivery estimate for the options you choose. Waterproofing and custom options can add preparation time before the order ships.

Need it by a particular day? Contact ETD before ordering. We can help with delivery questions, expedited or international shipping, and Alaska/Hawaii rates. Tracking is sent after label creation; backordered items may ship separately.

To request an eligible return, email ETD for authorization, an RMA number and the return form. Your return must be postmarked within 30 days of delivery.

Items must be brand-new with all parts and packaging. Custom-built items cannot be returned. Installation attempts or opened internal packaging may make an item ineligible, so check the policy before installing.

You pay return shipping. Refunds also deduct ETD's original shipping cost, including shipping ETD subsidized.

Allow 1-10 business days after receipt for a refund or exchange to be processed. Report damaged, missing or incorrect items promptly.